VIN programming procedure
WARNING: This page is about a different variant/trim than selected.
VIN (Vehicle Identification Number) is a number that has the vehicle's information (Maker, Vehicle Type, Vehicle Line/Series, Body Type, Engine Type, Transmission Type, Model Year, Plant Location and so forth. For more information, please refer to the group "GI" in this SERVICE INFORMATION). When replacing an ECM, the VIN must be programmed in the ECM. If there is no VIN in ECM memory, the fault code (DTC P0630) is set.
CAUTION:
The programmed VIN cannot be changed. When writing the VIN, confirm the VIN carefully.
- Select "VIN Writing" function in "Vehicle S/W Management".
- Select "Write VIN" in "ID Resister".
- Input the VIN.CAUTION: Before inputing the VIN, confirm the VIN again because the programmed VIN cannot be changed.