Repair Procedures: Inspection: Notes

Information 

Inspect the connector thoroughly for looseness, poor connection, bending, corrosion, contamination, deformation, or damage.

1. Disconnect the parking switch connector.
2. Turn Ignition "ON", & engine "OFF".
3. Measure the output signal in each range (P, R, N, D).

   Signal code table 

   Signal	P	R	N	D
   S1	10 - 26.4%	31.4 - 55.0%	57.3 - 73.7%	76.6 - 90%
   S2	90 - 73.6%	68.6 - 45.0%	42.7 - 26.3%	23.4 - 10%