DTC Information: DTC Detecting Condition
WARNING: This page is about a different car, the 2024 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Open or poor connector connection in D-CAN High line
- Open or poor connector connection in D-CAN Low line
- Open or poor connector connection in D-CAN line
- Short to power in D-CAN High line (This communication may be possible in the short-circuit and it may not be stored a fault code)
- Short to power in D-CAN Low line
- Short to ground in D-CAN High line
- Short to power in D-CAN Low line (This communication may be possible in the short-circuit and it may not be stored a fault code)
- Short to each other in D-CAN line
- Faulty modules that concerned to D-CAN
- Short to each other and power in D-CAN line
- Short to each other and ground in D-CAN line
- Faulty KDS
- External noise input to the D-CAN line
- Faulty CAN transceiver
- Faulty ICU
|
| Enable Condition |
|
| Threshold Value |
- D-CAN BUS off is detected
|
| Diagnosis Time |
|
| Symptom |
- D-CAN communication is not possible
|
| Erase Condition |
- Erase with KDS after the failure solved
|