Repair Procedures: Installation

WARNING: This page is about a different car, the 2024 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.
NOTE:
- Install the Engine Coolant Temperature Sensor (ECTS) to the specified torque.
- If the ECTS is dropped, it may cause internal damage. (Do not reuse)
- Install the ECTS by pushing it into the mounting hole when installing it. At this time do not impact the sensor.
- Apply the engine coolant to the O-ring.
Supplement the engine coolant.

(Refer to Engine Mechanical System - "COOLANT ")