| CHARGING SYSTEM NORMAL/DIODE RIPPLE NORMAL |
Charging system is normal. |
| NO CHARGING VOLTAGE |
Alternator does not supply charging current to battery.
- Check belts, connection between alternator and battery and replace belts or cable or alternator as necessary.
|
| LOW CHARGING VOLTAGE |
Alternator does not supply charging current to battery and electrical load to system fully.
- Check belts and alternator and replace as necessary.
|
| HIGH CHARGING VOLTAGE |
The voltage from alternator to battery is higher than normal limit during voltage regulating.
- Check connection and ground and replace regulator as necessary.
- Check electrolyte level in the battery.
|
| EXCESS RIPPLE DETECTED |
One or more diodes in the alternator is not functioning properly.
- Check alternator mounting and belts and replace as necessary.
|