Repair Procedures: Installation

WARNING: This page is about a different car, the 2024 Kia K5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Install the ECTS with the specified torque.
If ECTS is dropped, it may cause internal damage. Do not use it.

Apply the engine coolant to the O-ring (A).

Courtesy of KIA MOTORS AMERICA, INC.

The sensor fixing clip (A) must be replaced with a new one (Do not reuse.)

Courtesy of KIA MOTORS AMERICA, INC.

Install in the reverse order of removal.
Fill the engine cooling system with coolant.
(Refer to " Replacement And Air Bleeding ")