| DTC Strategy |
|
- Poor connector connection
- HO2S (Bank1, Sensor2)
|
| Enable Conditions |
- Battery voltage is higher than 10.7V
- Engine speed is between 1200 and 3520RPM
- EGT around ROS(Model) is higher than 300°C (572°F)
- Exhaust gas mass flow is more than 6.11g/s
- Change amount of exhaust gas mass flow is between -8.3 and 41.7g/s
- Fuel system status is fuel cut-off
- ROS voltage is lower than 0.3V before fuel cut-off
|
| Threshold Value |
- When integrated O2 mass is higher than specified value in fuel-cut in
|
| Diagnostic Time |
- 2 valid fuel cut-off phases
|
| MIL ON Condition |
|