DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitoring CAN messages	Variant coding not performed
Enable Condition	Ignition "ON" (Ignition "ON" signal received more than 2s) Battery voltage is between 9V and 16V
Threshold Value	Variant coding not performed When it received CAN message with LKAS after FCA unapplied coding
Diagnosis Time	Immediately
Symptom	SCC disengagement and shutdown SCC warning lamp turns on FCA disengagement and shutdown FCA warning lamp turns on NSCC disabled NSCC USM disable
Service Lamp ON Condition	-
Service Lamp OFF Condition	In case of satisfying release condition
Clear Condition	Normal variant coding performed