| DTC Strategy |
- Rationality check, high side (closed position out of range)
|
- Poor connector connection
- EWGA position sensor circuit is open or short circuit
- EWGA internal circuit abnormality
- Faulty ECM
|
| Enable Conditions |
- Battery voltage is higher than 9.5V
- ETC is higher than 5.25°C (41.45°F)
- IAT is higher than 5.25°C (41.45°F)
- Control duty is lower than -25%
- Sensor voltage at adapted closed point is valid
|
| Threshold Value |
Case1 |
- When waste gate in close position voltage is higher than 4.6V
|
| Case2 |
- When waste gate in close position voltage is lower than 3.2V
|
| Diagnostic Time |
|
| MIL ON Condition |
|