Component Inspection
| Inspection Condition | (+) Probe | (-) Probe | Reference | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
Fuel sender and fuel pump motor (component side) | 1 (fuel level sender (+)) | Fuel sender and fuel pump motor (component side) | 3 (fuel level sender (-)) | Table1 |
FUEL SENDER AND FUEL PUMP MOTOR SPECIFICATION
| Float Position | Sender Resistance (Ω) | Capacity (l ) |
|---|---|---|
| L | 297 to 305 | 3 |
| 1/2 | 85.5 to 87.5 | 32.7 |
| F | 14 to 16 | 65 |
Good
- Repair or replace as necessary and then Go to "VERIFICATION OF REPAIR " procedure.
No Good
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the fuel level sender and fuel pump motor and Go to "VERIFICATION OF REPAIR " procedure.