| DTC Strategy |
- Monitoring pressure change status of ELCM
|
- Poor connector connection
- Faulty evaporative system
- Faulty ELCM
|
| Enable Conditions |
- Vehicle speed is 0km/h (0mph)
- Engine speed is 0rpm
- Ignition "OFF"
- No related failures
- Ambient air pressure is greater than 75kPa
- ECU soaking time is greater than 5 hour
- Modeled ambient air temperature is greater than 4°C (39°F)
- Fuel tank level is less than 85%
- Normal auxiliary battery voltage (10 to 16V)
|
| Threshold Value |
- ELCM pressure difference from manifold pressure since the completion of ELCM pressure sensor warm up is greater than 20kPa or less than -20kPa
|
| Diagnostic Time |
|
| MIL ON Condition |
|