| DTC Strategy |
- Monitor the circuit (Check the open circuit and short circuit)
|
- Open or short circuit
- Faulty driven pulley pressure sensor
- Faulty PCM
|
| Enable Condition |
Case 1 |
- Battery voltage is higher than 10V
- Engine speed is higher than 350 RPM
- Lever position in "D" or "Sports" (forward gear)
- Oil temperature is higher than 0°C (32°F)
|
| Case 2 |
- Battery voltage is higher than 10V
- Engine speed is higher than 350 RPM
- Solenoid "ON"
- APS is less than 0%
|
| Threshold Value |
Case 1 |
- The output voltage of the sensor is between 2.5V and 3.5V
|
| Case 2 |
- Difference between the target driven pulley pressure and the actual driven pulley pressure is higher than 4 bar
|
| Detecting Time |
|
| Fail Safe |
|
| MIL ON Condition |
|