Repair Procedures: Removal

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery terminal.
Perform the oil pressure characteristics backup procedure using the KDS when replacing with a new ECM.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the battery.
(Refer to Engine Electrical System - "BATTERY ")
Disconnect the ECM connector (A).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the ECM (A) by loosening the bracket mounting bolts.
Tightening torque :

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.
Remove the ECM (A) from the bracket.
Tightening torque :

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.