Components Inspection
WARNING: This page is about a different variant/trim than selected.
- Turn ignition switch OFF.
- Remove the engine coolant temperature sensor.
(Refer to Engine Coolant Temperature Sensor - "REMOVAL ")
- After immersing the thermistor of the sensor into engine coolant, measure resistance between ECTS signal terminal and ground terminal.
- Check that the resistance is within the specification.
Temperature Resistance (KΩ) °C °F -40 -40 48.14 -20 -4 14.13 - 16.83 0 32 5.79 20 68 2.31 - 2.59 40 104 1.15 60 140 0.59 80 176 0.32