LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2021 >> Stinger GT-Line, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Idle Stop & Go (ISG) System - 2.0L >> Hood Switch >> Repair Procedures >> Replacement >> Hood Switch Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Hood Switch Inspection

  1. Remove the front bumper assembly.

    (Refer to Body - "FRONT BUMPER ASSEMBLY ")

  2. Disconnect the hood switch connector (A).
    G13423680Courtesy of KIA MOTORS AMERICA, INC.
  3. Check for continuity between the terminals and ground as shown below.

    (Refer to Body - "HOOD LATCH ")

    G13423681Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals