TCM terminal function: [SBC]
WARNING: This page is about a different variant/trim than selected.
| Pin | Description |
|---|---|
| 1 | Underdrive Clutch control solenoid valve |
| 2 | Damper clutch control solenoid valve |
| 3 | 27 Brake control solenoid valve |
| 5 | 6 Clutch control solenoid valve |
| 7 | Line pressure control solenoid valve |
| 8 | 35R Clutch control solenoid valve |
| 9 | 4 & OD Clutch control solenoid valve |
| 10 | 8LR Brake control solenoid valve |
| 11 | Manual mode switch "Select" |
| 12 | Manual mode switch "Up" |
| 13 | Manual mode switch "Down" |
| 14 | Inhibitor switch signal "S2" |
| 15 | Inhibitor switch power (5V) |
| 18 | SS-A solenoid valve (ON/OFF) |
| 20 | Paddle shift (Down) |
| 21 | Paddle shift (Up) |
| 22 | Parking switch sinal "S1" (PWM) |
| 24 | P/N relay |
| 25 | Oil temperature sensor (+) |
| 26 | Oil temperature sensor (-) |
| 31 | Input speed sensor signal |
| 32 | Output speed sensor signal |
| 43 | CAN HIGH |
| 44 | CCP CAN LOW |
| 49 | Inhibitor switch ground |
| 52 | CAN LOW |
| 53 | CCP CAN HIGH |
| 55 | Reverse lamp relay |
| 56 | Output speed sensor (power), 9V |
| 58 | Input speed sensor (power), 9V |
| 65 | Solenoid valve power 1 (UD, 27, 8LR, DC) |
| 66 | Solenoid valve power 2 (4 & OD, 35R, 6C, LP) |
| 67 | Power (VB) |
| 68 | Power (VB) |
| 71 | Ground |
| 72 | Solenoid valve power 4 (ON/OFF) |
| 73 | Ground |
| 74 | Ground |