LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2021 >> Stinger GT2, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Automatic Transmission Control System - 2.0L) >> Transmission Control Module (TCM) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Perform the oil pressure characteristics backup procedure using the KDS when replacing with a new TCM.
    1. Click the "Oil-pressure Characteristics BackUp & Input (TCU Replacement)".
      G13423760Courtesy of KIA MOTORS AMERICA, INC.
    2. Check the condition and then click the "OK".
      G13423761Courtesy of KIA MOTORS AMERICA, INC.
    3. Click the "BackUp".
    G13423762Courtesy of KIA MOTORS AMERICA, INC.
  2. Disconnect the TCM connector (A).
    G13423763Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the TCM (A) after loosening the nuts.

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G13423764Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals