DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Electrical check	Open in signal harness Open in ground harness Poor connection or damaged harness Faulty HO2S
Enable Condition	HO2S operative readiness is detected. (Sensor element resistance is lower than 1kΩ or heater maximum heating or normal heating for more than 75s) Battery voltage between 10V and 16V
Threshold Value	Downstream HO2S element resistance is higher than 22.5kΩ Open circuit
Diagnostic Time	2.5s
MIL ON Condition	2 driving cycles