Electronic Throttle Control (ETC) Module: Adjustment
WARNING: This page is about a different car, the 2024 Kia Carnival. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Must perform the ETC learning procedure after replacing or reinstalling the ETC.
- If not performing the ETC learning procedure after replacing or re-installing, MIL or DTCs might occur.
- Wait for 1 minute with the ignition ON.
- Start the engine and keep the idle status for 15 minutes.
- Waif for 1 minute with the ignition OFF.
- Restart the engine, check that the idle speed is stable.