| DTC Strategy |
|
- Poor connection
- Open or short to ground in power harness
- Open or short to ground in signal harness
- TPS
- ECM
|
| Enable Condition |
- Ignition switch is "ON" condition
- Engine operating state at idle (gas pedal value is less than 0.01%)
- TPS set point is lower than 61.078 degree
- TPS1 and TPS2 ratio failure is detected or TPS1 failure is detected
|
| Threshold Value |
- TPS2 voltage is lower than 0.1V
- TPS2 voltage is lower than 2.0V at engine idle
- Short circuit to ground or open circuit
|
| Diagnostic Time |
|
| MIL ON Condition |
|