Throttle Position Sensor (TPS)
WARNING: This page is about a different variant/trim than selected.
- Disconnect the electronic throttle control (ETC) connector (A).
 Courtesy of KIA MOTORS AMERICA, INC.
|
- Connect the KDS.
- Start the engine and measure the output voltage of TPS 1 and 2 at E.C.P and W.O.T.
 Courtesy of KIA MOTORS AMERICA, INC.
|
| Terminal |
Function |
| 3 |
Sensor ground |
| 4 |
Sensor 2 |
| 6 |
Sensor 1 |
| Item |
Specification |
| Sensor Output Voltage (V) |
Throttle angle (°) |
TPS 1 |
TPS 2 |
| 0 |
0.5 |
4.5 |
| 10 |
0.96 |
4.05 |
| 20 |
1.41 |
3.59 |
| 30 |
1.87 |
3.14 |
| 40 |
2.32 |
2.68 |
| 50 |
2.78 |
2.23 |
| 60 |
3.23 |
1.77 |
| 70 |
3.69 |
1.32 |
| 80 |
4.14 |
0.86 |
| 90 |
4.60 |
0.41 |
| 98 |
4.65 |
0.35 |
| (0°) |
0.5 |
4.5 |
| (86°) |
4.41 |
0.59 |