DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	CAN message monitoring	Poor connection CAN communication circuit (open, short) CAN High line open CAN Low line open CAN High and Low line open CAN High line short to battery CAN Low line short to battery CAN High, Low line short to each other CAN High, Low line short to each other and short to ground Terminating Resistance fault Transmitting controller BUS OFF Transmitting controller disconnected Transmitting controller power, fuse, ground fault Transmitting controller H/W, S/W fault CAN line noise ESC fault (CAN module fault)
Enable Condition	Engine "ON"
Threshold Value	When ESC CAN message not received
Detecting Time	2.1s
Fail Safe	On normal receipt of ESC CAN messages