Component Inspection
| Inspection Condition | (+) Probe | (-) Probe | Reference | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
FPCM (component side) | 6 (fuel sender +) | FPCM (component side) | 1 (fuel sender -) | Table below |
FUEL SENDER AND FUEL PUMP MOTOR SPECIFICATION
| Float Position | Sender Resistance (Ω) |
|---|---|
| E | 198 to 205 |
| 1/2 | 64 to 68 |
| F | 7 to 9 |
Good
- Repair or replace as necessary and then Go to "VERIFICATION OF REPAIR " procedure.
No Good
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the fuel sender and fuel pump motor and Go to "VERIFICATION OF REPAIR " procedure.