Component Inspection
| Inspection Condition | (+) Probe | (-) Probe | Reference | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
HO2S (Bank1, Sensor 2 connector | 2 (ground) | HO2S (Bank1, Sensor 2 connector | 1 (signal) | Fig. 1 |
| HO2S (Bank1, Sensor 2 connector | 3 (power) | HO2S (Bank1, Sensor 2 connector | 4 (heater) | ||
Good
- Go to "Verification Of Repair " procedure.
No Good
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the HO2S (Bank1, Sensor 2 and Go to "Verification Of Repair " procedure.