LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 1990 >> Range Rover Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> System Testing >> Multi-Meter Check Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Multi-Meter Check Procedure

CAUTION: Ensure multi-meter is correctly set to volts or ohms, dependent on which test is being carried out. Ensure ignition is switched ON or OFF as test requires.
  1. Disconnect 35-pin connector from ECU, connect adaptor plug. Commence check at appropriate pin on 35-pin on wiring harness.
  2. Check harness wires for continuity, check fuses and relays.
  3. Test related components.
  4. If intermittent contact is suspected, attempt to locate fault by flexing harness and cables or moving contacts.
scientia non olet · About LEMON Manuals