Security Code
NOTE:
If a push-button is touched accidentally when the ignition is off, a warning tone will sound. Turn the ignition on and the tone will stop.
- Obtain 5-digit security code from vehicle owner or manufacturer. Enter security code number using radio (Z111) push-button selectors.
- If correct security code is not entered in 3 successive attempts, the radio (Z111) will not accept another entry until the radio has been left on for 1 hour with the ignition on.
- When entering the code, be sure to complete the sequence numbering of that 5-digit code, even if you made a mistake. For example; if the correct code number sequence is '43215' and you mistakenly enter '42' instead of '43', continue the code number sequence '215' to complete that entry. A "beep" will sound, "CODE" will still be displayed and the radio will not operate. Re-enter the correct code '43215' and the radio will operate.
- If an audible "beep" is heard while entering the code, STOP immediately. Begin entering the code again, starting with the first number of the 5-digit security code.