General Specifications

Steering Torques

Type Hydraulically Assisted Worm and Roller
Turning Circle, Kerb to Kerb 11.9 Meters

Steering Geometery

Camber Angle - Unladen Condition 0°
Castor Angle - Unladen Condition 3.6° - 3.8°
Toe Out Included Angle 0° 5' +/- 0° 2.5'
0° 10' +/- 0° 5'
Swivel Pin Inclination 13°

Torque Specifications

Drag Link to Drop Arm 80 Nm (59 ft. lbs.)
Track Rod to Steering Knuckle 125 Nm (92 ft. lbs.)
Tension Collet to Steering Knuckle 5 Nm (4 ft. lbs.)
High Pressure Pipe Union 20 Nm (15 ft. lbs.)
Drag Link/Track Rod M8 Blolts 22 Nm (16 ft. lbs.)
Drag Link/Track Rod M10 Bolts 33 Nm (24 ft. lbs.)
Universal Joint to Intermediate Shaft 25 Nm (18 ft. lbs.)
Auxiliary Housing Bolts 40 Nm (30 ft. lbs.)
Auxiliary Housing Nuts 10 Nm (7 ft. lbs.)
Universal Joint to Steering Box 25 Nm (18 ft. lbs.)
Track Rod and Drag Link 80 Nm (59 ft. lbs.)