Oxygen Sensor: Service and Repair

Service repair no - 19.22.16

Remove
1. Raise vehicle on ramp.







2. Release HO2S harness from clip if fitted, and disconnect HO2S multiplug.
3. Remove HO2S from exhaust front pipe.

Refit
4. If refitting existing HO2S apply anti-seize compound to threads.
5. Fit new sealing washer to HO2S.
6. Fit HO2S and tighten to 45 Nm (33 labor ft).
7. Connect HO2S multiplug and secure harness to clip.
8. Lower vehicle.