2-Wheel Dynamometer
WARNING: This page is about a different car, the 1999 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
ABS will not function on a 2-wheel dynamometer. ABS warning light will illuminate during testing. Normal braking will be available. For brake testing, use 4-wheel dynamometer if possible. If brake testing on 2-wheel dynamometer is necessary, remove drive shaft to rear axle and put transmission and transfer box in neutral gear. If checking engine performance on 2-wheel dynamometer, remove drive shaft to stationary axle and put transfer box on high range.