Abs System & Dynamometer Testing
WARNING: This page is about a different car, the 2000 Land Rover Discovery and 1999 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
Vehicle may be run on a 4-wheel dynamometer providing front and rear rollers are running at same speed. Before testing vehicle on 4-wheel dynamometer, disable ABS system by disconnecting ABS modulator. ABS function will stop working and ABS warning light will illuminate. Normal braking will be available.
ABS will not function on a 2-wheel dynamometer. ABS warning light will illuminate during testing. Normal braking will be available. If brake testing on 2-wheel dynamometer is necessary, remove drive shaft to rear axle and put transmission in neutral.