Jacking & Hoisting: Notes
The following instructions must be carried out before raising the vehicle off the ground.
- Use a solid level ground surface.
- Apply parking brake.
- Select Park or 1st gear on main gearbox.
- Select Low range in transfer gearbox.
CAUTION:
To avoid damage occurring to the under body components of the vehicle the following jacking procedures must be adhered to: DO NOT POSITION JACKS OR AXLE STANDS UNDER THE FOLLOWING COMPONENTS.
- Body structure
- Air suspension pipes
- Bumpers
- Fuel lines
- Brake lines
- Front radius arms
- Panhard rod
- Steering linkage
- Rear Trailing links
- Fuel tank
- Engine sump
- Gearbox bell housing
CAUTION:
If supporting vehicle by the front crossmember, the safety stands must be positioned carefully to avoid damage to air suspension pipes.