System Specifications

Torque Specifications

Primary timing chain tensioner bolt 10 Nm (7 ft. lbs.)

Engine front cover:
M6 bolts 10 Nm (7 ft. lbs.)
M8 bolts and studs 20 Nm (15 ft. lbs.)

*Crankshaft pulley bolt:
Stage 1 45 Nm (33 ft. lbs.)
Stage 2 Further 85° Further 85°

New nuts/bolt(s) must be fitted ** New Torx bolts must be fitted + Bolts/Torx bolts/studs must be tightened in sequence - Bolts must be tightened in a diagonal sequence commencing with the 2 center bearing caps # Lubricate threads of bolts with engine oil prior to fitting +* Damage to internal components will result if this torque is exceeded