Inspection And Verification
WARNING: This page is about a different car, the 2006 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the customer concern.
- Visually inspect for obvious electrical faults.VISUAL INSPECTION
Electrical - Battery
- Fuses
Central and Battery Junction Boxes
Megafuses
- Wiring harness
- Damaged, loose or corroded connectors
- Touch Screen Display (TSD)
- GPS antenna
- Navigation module
- Steering wheel controls
- Clock spring
- Integrated Head Unit (IHU)
- Audio amplifier
- Anti-lock Brake System (ABS) module
- Wheel speed sensors
- Vehicle Information and Communication System (VICS Japan only) receiver
- VICS beacon antenna (Japan only)
- Controller Area Network (CAN) circuits
- Media Oriented System Transport (MOST) system
- Gigabit Video Interface (GVIF)
- Central Junction Box (CJB)
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
- Use the approved diagnostic system or a scan tool to retrieve any DTCs before moving onto the DTC index.
- Make sure that all DTCs are cleared following rectification.