LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2011 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Starting System) >> Starting System (V8 5.0L Petrol) >> Diagnostic Procedures >> Starting System - (Vehicles With: Smart Key) >> Pin Point Test >> Pinpoint Test A: Smart Key Not Found - Refer To Handbook
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test A: Smart Key Not Found - Refer To Handbook

WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition Mode Fails To Switch On 
    NOTE: In normal operation, pressing the start button for one second will cause the vehicle to enter the ignition mode. If the procedures below are followed the engine should crank
    NOTE: For automatic transmission vehicles, ensure the brake pedal is depressed and the park or neutral selected
    NOTE: For manual transmission vehicles ensure the clutch is fully depressed

    Ensure the smart Key is within the cabin area. Check the smart key is not close to any electrical devices e.g. Smart phones, laptops, laptop cases, games consoles and game console bags, briefcases, metal objects etc. All can affect the system performance and may block its communication with the vehicle. If the smart key battery low warning message has been displayed it is likely that the smart key battery has insufficient charge. Refer to section 'Back Up Start' for 10MY onwards

    Has the vehicle started? 

    YES:  No further action required

    NO:  Check and install a new battery as required. Clear the DTC and retest. If the problem persists, contact dealer technical support