Front Drive HALFSHAFTS: Specifications
GENERAL SPECIFICATION
| Item | Specification |
|---|---|
| Type | Fully floating, solid shafts with inner and outer constant velocity joints |
RECOMMENDED LUBRICANT
| Item | Specification |
|---|---|
| Front drive halfshaft (auto only) | Weicon anti-seize grease |
| Outboard joint | Use grease supplied with replacement boot kit |
| Inboard joint | Use grease supplied with replacement boot kit |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| Extension shaft bearing anchorage to block bolts - 3.2L Petrol | 48 | 35 |
| Extension shaft bearing anchorage to transmission bolts - 3.2L Petrol | 25 | 18 |
| Extension shaft bearing anchorage to block bolts- 2.2L Diesel | 65 | 48 |
| Extension shaft bearing anchorage to transmission bolts - 2.2L Diesel | 25 | 18 |
| Front halfshaft to hub bolt* | 45 + 80° | 33 + 80° |
| Heat shield to bearing anchorage | 10 | 7 |
* New nuts/bolts must be fitted