Anti-Lock Brake System (Abs) Module: Removal
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Make sure the ignition switch is in position 0.
- Remove the cover.
- Disconnect the electrical connector.
- Disconnect the 6 brake tubes.
- Position an absorbent cloth to collect fluid spillage.
- Remove the ABS module from the mounting bracket.
CAUTION:
Brake fluid will damage paint finished surfaces. If spilled, immediately remove the fluid and clean the area with water.
CAUTION:
Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug any open connections to prevent contamination.