Transfer Box Control Module Outputs: Solenoid
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
The solenoid switches the power flow on the actuation system between high/low range change mode and clutch control mode. When the solenoid is energized, the solenoid pin deploys and activates the clutch control mode. When the solenoid is de-energized, the internal spring rejects the solenoid pin and activates the high/low range change mode.
NOTE:
In order to replace the solenoid in service, the solenoid must be energized using the diagnostic tool.
The solenoid is connected to the transfer box control module with a two-pin connector.