Anti-Lock Control - Traction Control: General
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
The anti-lock control - traction control system is based on the 4 channel Bosch 8.0 system and provides the following brake functions:
- anti-lock brake system (ABS).
- ARM (active roll mitigation).
- CBC (corner brake control).
- DSC.
- electronic brake force distribution (EBD).
- ETC (electronic traction control).
- emergency brake assist (EBA).
- EDC (engine drag-torque control).
- HDC.
The system consists of the following components:
- A DSC switch.
- An HDC switch.
- An HDC relay.
- A stoplamp switch.
- Four wheel speed sensors.
- A yaw rate and lateral acceleration sensor.
- A steering angle sensor.
- Warning indicators; four on vehicles with a high line instrument cluster and five on vehicles with a low line instrument cluster.
- A hydraulic control unit (HCU) with attached anti-lock brake system (ABS) module.