DTC B1211-2B: Driver Seatbelt Retractor Pretensioner Deployment Control - Signal cross coupled: Action

WARNING: This page is about a different car, the 2018 Jaguar XF, 2017 Jaguar XF, and 2016 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The deployable device connector has a locking plunger (orange tab) which should only fully lock when the two connectors are securely mated, male to female. If the plunger can move to the locked position easily when not mated (ie: using reasonable pressure), then this indicates that the connector is damaged. Install a new wiring harness as necessary.

Refer to the appropriate system wiring diagrams and check the driver seatbelt retractor and pretensioner circuit for short circuit to another restraints circuit