DTC U2300-56: Central Configuration - Invalid/incomplete configuration: Action
WARNING: This page is about a different car, the 2018 Jaguar XF, 2017 Jaguar XF, and 2016 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the DTCs.
- If U2300-64 is also set, perform the corrective actions for U2300-56 first and retest.
- Using the Jaguar Land Rover approved diagnostic equipment, check and update the car configuration file as necessary. Clear the DTCs and perform routine - On Demand Self Test
- Using the Jaguar Land Rover approved diagnostic equipment, re-configure the transfer case control module with the latest level software