DTC U2300-64: Central Configuration - Signal plausibility failure: Action

WARNING: This page is about a different car, the 2018 Jaguar XF, 2017 Jaguar XF, and 2016 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the DTCs.
If U2300-56 is also set, perform the corrective actions for U2300-56 first and retest.

Using the Jaguar Land Rover approved diagnostic equipment, check and update the car configuration file as necessary. Clear the DTCs and perform routine - On Demand Self Test
Check the part number of the transfer case control module. Install a new transfer case control module as necessary