DTC P0715-64: Turbine/Input Shaft Speed Sensor A Circuit - Signal plausibility failure: Action

WARNING: This page is about a different car, the 2016 Land Rover LR4, 2015 Land Rover LR4, and 2014 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.

Using the manufacturer approved diagnostic system, clear the DTCs and retest. Check datalogger signals - Turbine Speed (0x1E72) - Transmission Output Shaft Speed (0x1E68) - for plausibility. If the fault persists, install a new transmission control module