DTC C200A-64: Rear Axle Wheel Speed Sensors Swapped - Signal plausibility failure: Action
WARNING: This page is about a different car, the 2016 Land Rover LR4, 2015 Land Rover LR4, and 2014 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
After clearing the DTCs, the warning indicator(s) may not extinguish until the vehicle speed has exceeded 10mph (15kph)
- Refer to the appropriate system wiring diagrams and check the rear wheel speed sensor circuits for correct connection to the anti-lock brake system control module