DTC B1211-13: Driver Seatbelt Retractor Pretensioner Deployment Control - Circuit open: Action
WARNING: This page is about a different car, the 2016 Land Rover LR4, 2015 Land Rover LR4, and 2014 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
- Visually inspect the driver seatbelt retractor and pretensioner Ak2 connector, the locking plunger should be flush with the housing. If not, push the locking plunger in. Clear the DTCs and retest
- Refer to the appropriate system wiring diagrams and check the driver seatbelt retractor and pretensioner circuit for open circuit, high resistance