DTC B1214-11: Passenger Seatbelt Retractor Pretensioner Deployment Control - Circuit short to ground: Action
WARNING: This page is about a different car, the 2016 Land Rover LR4, 2015 Land Rover LR4, and 2014 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
- Visually inspect the passenger seatbelt retractor and pretensioner Ak2 connector, the locking plunger should be flush with the housing. If not, push the locking plunger in. Clear the DTCs and retest
- Refer to the appropriate system wiring diagrams and check the passenger seatbelt retractor and pretensioner circuit for short circuit to ground