DTC B1C0A-88: Rear Control panel - Bus off: Action
WARNING: This page is about a different car, the 2016 Land Rover LR4, 2015 Land Rover LR4, and 2014 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate system wiring diagrams and check the rear integrated control panel power and ground circuits for open circuit, high resistance
- Refer to the appropriate system wiring diagrams and check the LIN bus circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Using the manufacturer approved diagnostic system, check the rear integrated control panel for related DTCs and refer to the relevant DTC index
- Using the manufacturer approved diagnostic system, clear the DTCs and retest. If the fault persists, install a new rear temperature blend motor
- Using the manufacturer approved diagnostic system, clear the DTCs and retest. If the fault persists, install a new rear face/feet motor
- Using the manufacturer approved diagnostic system, clear the DTCs and retest. If the fault persists, install a new automatic temperature control module