DTC P0810-62: Clutch Position Control Error - Signal compare failure: Action
WARNING: This page is about a different car, the 2016 Land Rover LR4, 2015 Land Rover LR4, and 2014 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate system wiring diagrams and check the rear differential actuator circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Refer to the appropriate system wiring diagrams and check the rear differential actuator position sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Using the manufacturer approved diagnostic system, perform routine - Control Module Calibration. Clear the DTCs and retest. If the fault persists, install a new rear differential actuator