LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2013 >> LR4 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Anti-Lock Control - Traction Control -- LR4/L319) >> Anti-Lock Control - Traction Control >> Front Wheel Speed Sensor >> Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Removal

WARNING: This page is about a different car, the 2016 Land Rover LR4, 2015 Land Rover LR4, and 2014 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
  1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

    Raise and support the vehicle.

  2. Remove the fender splash shield.

    For additional information, refer to: Fender Splash Shield .

  3. G11592464

    Release the brake hose bracket from the wheel knuckle.

    • Remove the retaining bolt.
  4. CAUTION: Do not allow the brake caliper to hang on the brake hose.
    G11597367

    Release the brake caliper anchor plate from the wheel knuckle and tie the caliper aside.

    • Remove the two retaining bolts.
  5. G11592465

    Release the wheel speed sensor from the wheel knuckle.

    • Remove the bolt.
  6. G11597369

    Remove the wheel speed sensor.

    • Disconnect the electrical connector.
    • Release the wiring harness from the 5 clips.
scientia non olet · About LEMON Manuals