DTC C1A96-64: Brake Light Switch - Signal plausibility failure: Action

Check the Stop lamp function. Ensure the brake pedal switch is correctly installed and configured. Refer to the appropriate system wiring diagrams and check the brake pedal switch circuit, rectify as necessary. Check the engine control module for DTCs. After rectification, either clear the DTCs and cycle the ignition or cycle the ignition and drive the vehicle above 15kph with at least one brake pedal press to ensure the lamps extinguish. When cycling the ignition, allow sufficient time for the 'P' symbol illumination to extinguish on the gear shifter (if installed) before returning the ignition state to on