DTC P0327-21: Knock Sensor 1 Circuit Low (Bank1) - Signal amplitude < minimum: Action
NOTE:
Monitor description
. Plausibility of sensor output against engine speed
- Check engine control module for related misfire DTCs and refer to this DTC index. Rectify these first
- Refer to the appropriate system wiring diagrams and check knock sensor circuit for short circuit to ground, short circuit to power
- Measure knock sensor circuit for correct resistance
- 1 to 1.8 Mega Ohms
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Clear the DTCs and retest
- Check and install new knock sensor as required